Tùy chọn
Phụ kiện
Mô tả
- Unique Technology
- ±2mm High Accuracy : TOKYO KEIKI’s advanced pulse technologies achieve +/-2mm accuracy. (Rod Antenna : +/-3mm)
- Advanced Echo Processing : “Multi-echo Historical-validation” checks trend continuity to track the echoes from liquid during process operation for smooth measurement. And, “Auto Noise Table Function” is achieves stable and continuous level measurement on the Reactor tank application.
- Rapid Tracking : “Full-range Search Mode” boosts detection speed and track up to 2m/sec level change.
- Flow & Volume Calculation : “Extended calculation mode” outputs not only Tank Volume, but also Open Channel Flow Rate by weir or flume combination.
- Wide Line-up Antenna : KRG-10 can be installed for Corrosive, Adhesive and Hygienic applications by various antenna; SUS Cone for 2"(DN50)&4"(DN100) nozzles, PTFE Sealing for 2” (DN50) & 4” (DN100) nozzles, PTA Rod for 1"(DN25) nozzle, Furthermore, we will provide special antenna for higher temperature over 200°C or higher pressure over 1.5MPa.
- Wide Measuring Range : Up to 30m Max. by 4” (DN100) Cone Antenna
- Stable Measurement
- ”Disturbance Noise Elimination” : Cyclical & Multi-bounce noise echoes are eliminable for stable output. It realizes stable measurement without leap in process tank measurement.
- ”Predict Output” : As the result of echo validation, KRG-10 can output predicted data reasonably.
- Distance Filter Window : This window is effective for echo searching, and variable ranging available.
- Bottom Echo Handler : Generally, liquids having low dielectric constant are difficult to be divide surface echo from tank bottom echo when its level is quite low and close to bottom. KRG-10 can deem the level is close to almost bottom without fluctuation.
- Double Bounce Handler : Delayed echo by multi-bounce between liquid surface and tank ceiling will be eliminated.
- User-friendly Design
- Easy Configuration : Graphical HART Configuration on Laptop PC Also menu driven 4-keys input (need LCD module)
- Rotatable LCD (90° step) : LCD front face can be changed to all four points of the compass.
- Sun Shade for LCD protection : Rubber-made Sun Shade is provided to protect top-mount LCD.
- Removable LCD module : LCD module is removal in case that it is not required. In such case, a blind cover the same as terminal cover will be provided before shipment.
Thông số kỹ thuật
| Hạng mục | Thông số | Giá trị / Mô tả |
| Thông số chung |
Tần số |
26 GHz |
|
Góc chùm tia
(Tùy chọn)
|
8° (ăng-ten hình nón 4 inch & ăng-ten kín PTFE) |
| 18° (ăng-ten hình nón 2 inch & ăng-ten kín PTFE) |
| 25° (ăng-ten dạng que) |
| Đo lường |
Khoảng đo tối đa |
lên tới 30 m
Lưu ý: Có sự thay đổi theo góc chùm tia
|
| Độ chính xác |
Cone & PTFE Sealing: ±2 mm |
| Rod: ±3 mm |
| Độ lặp lại |
±1 mm |
| Chu kỳ đo |
1 s |
| Tốc độ theo dõi |
2 m/s (tối đa) |
| Hiển thị |
Màn hình |
LCD 5 chữ số / 4 phím điều khiển bằng menu |
| Chế độ hiển thị |
Mức, Khoảng cách, Thể tích (Lưu lượng), Dòng điện, Cường độ tín hiệu (tùy chọn) |
| Nguồn cấp & tín hiệu ra |
Nguồn cấp (Loop-powered) |
DC 10.5 ~ 36 V (phiên bản Ex có yêu cầu điện áp riêng) |
| Tín hiệu ngõ ra |
4 ~ 20 mA + HART |
| Cảnh báo |
Giữ, 22 mA hoặc 3.6 mA |
| Nhiệt độ môi trường |
-40 ~ +70 °C (Không Ex) / -40 ~ +60 °C (Ex) |
| Thông số cơ khí |
Áp suất bồn |
1.5 MPa |
| Nhiệt độ bồn |
-40 ~ +200 °C |
| Cấp bảo vệ |
IP66, NEMA 4X |
| ATEX |
II 1G Ex ia IIC T4 Ga / II 1D Ex ia IIIC T135°C Da, IP66 |
| II 1/2G Ex d ia IIC T4 Gb/Ga / II 2G Ex d ia IIC T4 Gb, IP66 |
| IECEx |
Ex ia IIC T4 Ga / Ex ia IIIC T135°C Da, IP66 |
| Ex d ia IIC T4 Gb/Ga / Ex d ia IIIC T4 Gb, IP66 |
| Chức năng |
- Xác thực lịch sử đa phản xạ (Multi-echo) |
| - Xử lý phản xạ đáy |
| - Tính toán thể tích |
| - Loại bỏ nhiễu |
| - Xử lý phản xạ kép |
| - Cửa sổ lọc khoảng cách |
| - Chế độ quét toàn dải |
| - Tín hiệu dự đoán đầu ra |
| - Tính lưu lượng (đập tràn / máng đo) |
Video
Bình luận
Đánh giá & Nhận xét về Cảm biến đo mực nước radar Tokyokeiki KRG-10 (18°/ 2 inch Cone antenna)
Hỏi và đáp (0 Bình luận)
Tải dữ liệu